INFORS HT blog

Humidification systems are vital for sucessful small-volume and long-lasting cultivations in the incubator shaker (e.g. screening in microtiter plates or cell culture). The different systems available on the market have one primary focus: to reduce evaporation losses by increasing the humidity levels inside the incubation chamber. However, there are significant differences in terms of quality, humidity control and sterility. This blog post highlights the Pros and Cons of the 3 most commonly used humidification systems.

The impeller, also known as agitator, is a key component of the bioreactor. It performs the important tasks of mixing, aeration, heat and mass transfer within the vessel. Learn about the different characteristics of various types of impeller and the importance of their designs.

In order to understand the optimum conditions for in-vitro culture, you need to know which natural environment gives the organism what they need to grow and thrive. In addition, a clear understanding of the different growth phases in a bioprocess is essential for selecting a bioprocess strategy.

In today’s world, bioprocess software solutions are an essential tool for modern laboratories. Bioprocesses are controlled using process data and optimized with the help of mathematical models based on the gathered data. Manual experiment planning and data documentation cannot keep up with this in the long term. Inefficiency, duplication of work, a lack of planning and poor or inconsistent data quality can have devastating consequences. If you want to have the quality, cost, and time-to-market of your products under control, it is essential to consistently digitize your bioprocesses – starting with the preculture in the incubator shaker.

Setting up a bioreactor is not as easy as it sometimes sounds. Which sensors do I have to calibrate before autoclaving? Is it important to protect the filters with foil from water condensate in the autoclave? These are only some questions which arise when preparing a bioreactor for its next cultivation run. This blog post will guide you through the assembly of a bioreactor step by step and provide practical help for successfully starting a bioprocess.

For a successful aerobic cultivation, a good oxygen transfer is vital. The determination of the volumetric oxygen transfer coefficient (k_La) and the OTR helps you to optimize the bioprocess in bioreactors and ensure a successful scale-up process.