Measuring modes | OPL01: for very high cell densities; OPL05: for higher cell densities; OPL10: for lower cell densities |
---|---|
Measuring wavelength | 840 nm – 910 nm |
OD range | Different sensors (OPL) for changing OD ranges |
Measuring principle | Single-channel light absorption |
Detector | silicon photo diode (hermetically-sealed) |
Light source | Hybrid LED |
Temperature | up to 50 °C |
Cleansing | Autoclaving after every use |
Optek Turbidity Sensors | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Measuring modes | OPL01: for very high cell densities; OPL05: for higher cell densities; OPL10: for lower cell densities | LED green for lower cell densities,LED Infrared for high cell densities | ||||||||
Measuring wavelength | 840 nm – 910 nm | 521 nm / 940 nm | ||||||||
OD range | Different sensors (OPL) for changing OD ranges | 0,5 - 500 OD600 | ||||||||
Measuring principle | Single-channel light absorption | backscattering light | ||||||||
Detector | silicon photo diode (hermetically-sealed) | Photodiode | ||||||||
Light source | Hybrid LED | Controlled LED Array | ||||||||
Temperature | up to 50 °C | 15 - 50 °C (75 °C) | ||||||||
Cleansing | Autoclaving after every use | no autoclaving | ||||||||
Go to CGQ BioR | Go to Super Safe Sampler | Go to Minifors 2 | Go to Multifors 2 | Go to Labfors 5 | Go to Techfors-S | Go to Techfors |